EasyManuals Logo
Home>Volvo Penta>Engine>V6-200

Volvo Penta V6-200 User Manual

Volvo Penta V6-200
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Engine Shutdown
Before Engine Shutdown
Plan where the boat will be stopped, reduce speed to
approach the area (dock, anchorage, etc.). Maneuver
the boat to the dock or other safe place, position the
boat so that it can be secured or anchored. When in
position, move the shift mechanism to neutral. Secure
the boat, if possible the captain should remain at the
helm while the passengers secure the boat.
WARNING!
Avoid abrupt changes in speed or direction when
maneuvering towards a dock or slip. Passengers could
be injured if thrown about in the boat due to sudden
changes in boat movement.
Stop the Engine
1 The control lever must be at NEUTRAL N.
2 Let engine return to idle.
Allow the engine to run at low idle, in neutral, for a
few minutes after operations are completed. This
allows engine temperatures to equalize. This is
especially important when the engine has been run
at high rpm or under heavy load just prior to shut-
down.
3 Turn ignition key to OFF 0.
NOTICE! Do not stop the engine at speeds above idle
or “speed up” the engine while turning off the ignition.
Do not stop the engine while in gear or while the boat
is moving. Engine damage could result from water
being sucked back up through the exhaust ports.
P0018305
P0018311
47706041 07-2014 © AB VOLVO PENTA 43

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta V6-200 and is the answer not in the manual?

Volvo Penta V6-200 Specifications

General IconGeneral
BrandVolvo Penta
ModelV6-200
CategoryEngine
LanguageEnglish

Related product manuals