Version 1 Page 3 28/09/20
Skill Level
This conversion kit for the Bruder Vovlo A60H is recommended to users with medium and above
competence.
The following instructions are deemed a guide to “how to do the conversion” not a concise step by
step procedure.
Caution Note
• Carefully read and fully understand the instructions before commencing assembly. A
supervising adult should also read and understand the instructions if a child assembles the
model.
• When assembling this kit, tools including knives and heat gun are used. Extra care should
always be taken to avoid personal injury and damage to the kit.
• All instructions relating to tools, glues, etc (not included in the kit) must be adhered to at all
times.
• Keep out of reach of small children. Kit contains small parts and plastic bags which are
harmful to children if swallowed.
Recommended Tools
• Philips screw driver
• Allen keys
• Hex socket
• HSS drill bits 2mm, 3mm, 3.5mm, 4mm, 5mm, 6mm, 10mm
• File
• Pliers
• Soldering Iron
• Side cutters
• Hot glue gun
• Knife
• G clamp (for pushing motors into 3D printed parts)
Parts not included in kit
• Servo double horn (60mm)
• Servo rod/stiff wire
• Heat shrink
• Glue
To Next Page
Loading...
Need help?
General
