EasyManuals Logo
Home>Vonyx>Speakers>VSA BT Series

Vonyx VSA BT Series User Manual

Vonyx VSA BT Series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
MEDIAPLAYER
1. USB SLOT
You can play media files from a USB device by
connecting the device to this slot
2. DISPLAY
The display shows multiple forms of information, for
example current MODE, elapsed time, etc
3. MODE BUTTON
Press to change modes between playing AUX,
USB, MP3 and BT
4. PLAY/PAUSE BUTTON
Press this button to start or pause play
5. FOLDER BUTTON
Press this button to enter FOLDER selection
6. PREVIOUS BUTTON
Press this button to go to the previous track. Press
and hold to scan backwards within tracks
7. NEXT BUTTON
Press this button to go to the next track.
Press and hold to scan forwards within tracks
CONNECTING WITH BT
1. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the
music. See the operating instructions for that device.
2. Press the “BT” button and activate BT-function.
3. Select VONYX on your BT-device and make the BT-connection
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10 meter without any barrier.
REPLACING THE FUSE
If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vonyx VSA BT Series and is the answer not in the manual?

Vonyx VSA BT Series Specifications

General IconGeneral
BrandVonyx
ModelVSA BT Series
CategorySpeakers
LanguageEnglish

Related product manuals