OPERATION MANUAL
Front Panel
1 2 3 4 5 6 7 8 9 10 11 12 13
NORMAL channel
1. INPUT Jack Sockets
Guitar input jacks for the NORMAL channel. The ‘HIGH’ input will give you more gain and output volume
whereas the ‘LOW’ input will be quieter and have more clean headroom.
2. VOLUME control
This controls the NORMAL Channel pre-amp volume. It can be used in conjunction with the MASTER
VOLUME to create the perfect balance between pre/power amp distortion and overall output level. Turn
clockwise for more gain.
3. BRIGHT switch
When activated it adds more high-end sparkle to your sound.
TOP BOOST Channel
4. INPUT Jack Sockets
Guitar input jacks for the TOP BOOST channel. The ‘HIGH’ input will give you more gain and output vol-
ume whereas the ‘LOW’ input will be quieter and have more clean headroom.
5. VOLUME Control
This controls the TOP BOOST channel pre-amp volume. It can be used in conjunction with the MASTER
VOLUME to create the perfect balance between pre/power amp distortion and overall output level. Turn
clockwise for more gain.
6. TREBLE Control
This controls the high frequencies in your sound—from soft and smooth when turned down (counter
clockwise) to bright and cutting when cranked (clockwise) and all points in-between.
7. BASS Control
This controls the low frequencies in your sound—from thin and light when turned down (counter clock-
wise) to warm and heavy when turned up full (clockwise) and all points in-between.
8. HOT/COOL Switch
When set to COOL the TOP BOOST channel operates in traditional fashion with the TREBLE and BASS
controls fully activated. When set to HOT, the tone controls are partially bypassed providing a more pure
signal path, and a boost in gain. This feature is also foot switchable making it perfect for boosting leads
and solos!
To Next Page
Loading...
Need help?
General
