14
Effects
The DA10/DA20 provides eleven of the most popular effects
(some effects actually combine two effects). You can adjust
the SPEED parameter of modulation effects or the TIME pa-
rameter of delay/reverb effects simply by pressing the TAP
switch twice. In addition to using the EDIT 1 knob to adjust
the most important parameters, you can make more de-
tailed adjustments by holding down the TAP button or BY-
PASS button while turning the EDIT 1 knob.
NOTE: In order to adjust the effect parameters, Effect Bypass
must be off (BYPASS LED dark). If you hold down the
TAP switch and turn the EDIT 1 knob when bypass is
on (BYPASS LED lit), you’ll be adjusting the noise re-
duction - not the effect parameter.
TYPE TAP EDIT 1 EDIT 2 [TAP+EDIT 1] EDIT 3 [BYPASS+EDIT 1]
AUTO WAH --- WAH SENS WAH ATTACK WAH POLARITY
COMP --- COMP SENS COMP ATTACK ---
COMP+PHASER PHASER SPEED COMP SENS PHASER SPEED PHASER RESONANCE
COMP+CHORUS CHORUS SPEED COMP SENS CHORUS SPEED CHORUS MIX
CHORUS+DELAY DELAY TIME DELAY LEVEL DELAY TIME CHORUS MIX
CHORUS+REVERB CHORUS SPEED REVERB LEVEL CHORUS SPEED CHORUS MIX
FLANGER+REVERB FLANGER SPEED REVERB LEVEL FLANGER SPEED FLANGER RESONANCE
TREMOLO+REVERB TREMOLO SPEED REVERB LEVEL TREMOLO SPEED TREMOLO DEPTH
ROTARY+REVERB ROTARY SPEED REVERB LEVEL ROTARY SPEED ROTARY SENS
DELAY DELAY TIME DELAY LEVEL DELAY TIME DELAY FEEDBACK
REVERB REVERB TIME REVERB LEVEL REVERB TIME REVERB HIDAMP
To Next Page
Loading...
Need help?
General
