12
IMPORTANT
Check for a dial tone by pressing . If you hear a dial
tone, the installation is successful.
WARNING
Do not place your VTech 15100 in the bathroom or other
humid areas.
IMPORTANT
The base station must be plugged into the mains power
socket at all times. Do not connect the telephone line
until the handset is fully charged. Only use the power
adaptor, telephone cables and batteries supplied with
the product.
BATTERY LOw wARNING
If the
to recharge the handset before you can use it again.
During charging, the
the display.
BATTERY PERfORMANCE
In ideal conditions, the fully charged battery should give
up to 12 hours talk time, or 160 hours standby time, on a
single charge. Note that a new battery will not reach full
capacity until it has been in normal use for several days.
To keep the batteries in the best condition, leave the
handset off the base for a few hours at a time. Running
the battery right down at least once a week will help
To Next Page
Loading...
Need help?
General
