VTech 4-in-1 Stroll & Grow Tek Trike User Manual

6
6
6
ASSEMBLY AND SET-UP
Foradditionalassistance,watchourassemblyvideoat:vtechkids.com/trike
1. Align the front wheel (I) with the slot on
the frame (A). The pedal lock should
be on the right side of the trike tire.
A
I
T8
T8
2. Place the covers (T8) over both
sides of the frame (A) and screw
them together with 4 T7 screws.
Then, set aside.
Left T7 (x2) Right T7 (x2)
A
L
M
3. Push down the back wheel cover(M)
into the slot (L), until it snaps in. Do
this twice, once for each wheel.
4. Push the right wheel (L1) and left
wheel (L2) into the slots of (C).
They will lock in. (The right wheel
(L1) has a parking brake but the left
wheel does not.)
C
L1
L2
Parking Brake
In case you need to remove a back wheel
after it’s been attached, use a athead
screwdriver and push the lock inside the
slot (pictured below) to release the back
wheel.
T1 (x1) (for G & C)
T8 (x2) (for I & A)T10 T9 (X2) for B
INCLUDEDHARDWARE
REQUIREDTOOLSFOR
ASSEMBLY
(NOT INCLUDED)
T2 (x2) for D
T3 (x3) for B,C
T4 (x2) for J
T7 (x12) for F,N,K,T8
Slot

VTech 4-in-1 Stroll & Grow Tek Trike Specifications

General

Brand	VTech
Model	4-in-1 Stroll & Grow Tek Trike
Category	Bicycle
Language	English