EN - 14
Set up
Default settings are indicated by asterisks (*).
Setting Options Adjustable by
Handset earpiece volume 1, 2*, 3, 4 User and administrator
Speakerphone volume 1, 2, 3, 4, 5*, 6, 7, 8 User and administrator
Ringer volume Low, Medium*, High Administrator only
Ringer tone Tone 1*, Tone 2, Tone 3 Administrator only
Voicemail voltage detection
Disable voicemail voltage detection,
Periodic low voltage pulse detection
method,
Steady high voltage and periodic
high voltage pulse detection method
Administrator only
Ringer tone
There are 3 ringer tone options.
To change the ringer tone:
1. Turn the telephone base over with the bottom side facing up. Remove the mounting bracket if
it is in desktop position. To remove the mounting bracket, firmly push both tabs downward and
pull up until they release from the grooves.
2. Slide the ringer tone switch to select the desired detented position using a narrow object such
as a standard screwdriver.
3. Install the mounting bracket accordingly.
To Next Page
Loading...
Need help?
General
