28
There is
interference
during a
telephone
conversation.
My calls fade
out when
I am using
the cordless
handset.
The handset may be out
of range. Move it closer
to the telephone base.
If you subscribe to
high-speed Internet
service (DSL - digital
subscriber line) through
your telephone line, you
must install a DSL filter
between the telephone
line cord and the
telephone wall jack. The
filter prevents noise and
caller ID problems caused
by DSL interference.
Contact your DSL
service provider for more
information about DSL
filters.
Appliances or other
cordless telephones
plugged into the
same circuit as the
telephone base can
cause interference. Try
moving the appliance
or telephone base to
another outlet.
The location of your
telephone base can
impact the performance
of your cordless phone.
For better reception,
install the telephone base
in a centralized location
within your home or
office, away from walls
or other obstructions.
In many environments,
elevating the telephone
base improves overall
performance.
The telephone
does not
receive caller
ID or the
telephone does
not show caller
ID during call
waiting.
Caller ID is a subscription
service. You must
subscribe to this service
from your telephone
service provider for this
feature to work on your
telephone.
Both your and the
caller’s telephone service
providers must use
equipment compatible
with the caller ID service.
The caller may not be
calling from an area
which supports caller ID.
The caller ID information
displays after the first or
second ring.
The display
shows Out of
range or no
pwr at base.
The handset may be out
of range. Move it closer
to the telephone base.
Make sure the power
cord is securely plugged
into the telephone base.
Use a working electrical
outlet not controlled by a
wall switch.
To Next Page
Loading...
Need help?
General
