15
PRODUCT FEATURES – RC
SMARTPOINT
®
RACER
1. OFF/MODE SELECTOR SWITCH – VEHICLE
To turn the unit ON, slide the OFF/
MODE SELECTOR SWITCH to
the REMOTE CONTROL MODE
(
) or STANDARD MODE
( ) position. To turn the unit OFF,
slide the OFF/MODE SELECTOR
SWITCH to the OFF ( ) position.
2. CHANNEL SELECTOR SWITCH
To allow the RC SmartPoint
®
Racer
and remote control to function
together, slide the CHANNEL
SELECTOR SWITCH to the same
location on the RC SmartPoint
®
Racer and remote control.
Note: If two or three RC SmartPoint
®
Racers are operating in the same
vicinity, place each vehicle on a different channel. (A maximum of
three RC SmartPoint
®
Racers can operate in one location.)
3. FORWARD/BACKWARD BUTTONS
In REMOTE CONTROL MODE,
press the FORWARD BUTTON
or BACKWARD BUTTON on the
remote to make the race car go
forward or backward. (The effective
distance for the race car to recognize
the remote control is 9 ft. to 18 ft. The
distance will be shorter when the
batteries are low.)
Product Features – RC Smartpoint
®
Racer
To Next Page
Loading...
Need help?
General