VTech IA5854 User Manual

www.vtechphones.com
27
Basic Operation
BASIC OPERATION
Answering System Operation At the Base
• By setting announce only to on or off, you decide which announcement your callers will hear when
the system answers a call (the system comes set for normal answering, with announce only turned
off). See Set announce only, located in the Feature Summary chart later in this section, to change
your announcement selection.
Record Your Announcement
1. Press MENU until you hear “Announcement. Press PLAY or press RECORD. To continue setup,
press MENU.”
2. Press REC/MEMO. After you hear “Record after the tone. Press STOP when you are done.” followed
by a beep, speak toward the base to record an announcement up to 90 seconds long.
3. Press PLAY/STOP. The system plays back your recorded message.
To review your announcement at any time:
1. Press MENU until you hear “ Announcement. Press PLAY or press RECORD. To continue setup,
press MENU.”
2. Press PLAY/STOP, the system plays the current announcement.
To delete your announcement:
Press DELETE during announcement playback. The system will use the pre-recorded announcement
until you record a new one.
Turn answering
system on or off
Record outgoing
announcements,
and memos
Review/change clock setting;
conrm feature settings
Enter answering system
f eat u re s etu p a nd
choose a feature to set..
...
Select a feature setting
• Announcements
less than three
s e c o n d s i n
length will not be
recorded.”

VTech IA5854 Specifications

General

Brand	VTech
Model	IA5854
Category	Cordless Telephone
Language	English