this equipment does not disable
your alarm equipment. If you
have questions about what will
disable alarm equipment, consult
your telephone company or a
qualified installer.
3. Repair instructions
If this equipment is malfunctioning,
it must be unplugged from the
modular jack until the problem has
been corrected. Repairs to this
telephone equipment can only be
made by the manufacturer or its
authorized agents. For repair
procedures, follow the instructions
outlined under the Limited Warranty.
4. Rights of the telephone
com pany
If this equipment is causing
harm to the telephone network,
the telephone company may
temporarily discontinue your
telephone service. The
telephone company is required
to notify you before interrupting
service. If advance notice is not
practical, you will be notified as
soon as possible. You will be
given the opportunity to correct
the problem and the telephone
company is required to inform
you of your right to file a
complaint with the FCC. Your
telephone company may make
changes in its facilities,
equipment, operation, or
procedures that could affect the
proper functioning of this product.
The telephone company is
required to notify you if such
changes are planned.
5. Hearing aid compatibility
If this product is equipped with
a corded or cordless handset, it
is hearing aid compatible.
6. Programming/testing of
emergency numbers
If this product has memory
dialing locations, you may choose
to store police, fire department
and emergency medical service
telephone numbers in these
locations. If you do, please keep
three things in mind:
a We recommend that you also
write the telephone number on
the directory card, so that
you can still dial the emergency
number manually if the memory
dialing feature doesn’t work.
b This feature is provided only as a
convenience, and the manufac-
turer assumes no responsibil-
ity for customer reliance upon
the memory feature.
c Testing the emergency tele-
phone numbers you have
stored is not recommended.
However, if you do make a call to
an emergency number:
• You must remain on the line
and briefly explain the rea-
son for the call before hang-
ing up.
• Programming/testing of emer-
gency numbers should be per-
formed during off-peak hours,
such as in the early morning or
late evening, when the emer-
gency services tend to be less
busy.
IC (Industry Canada)
This telephone is registered for
use in Canada.
Notice :
The REN assigned to this device
denotes the number of devices you
may connect to the telephone loop
which is used by the device to
prevent overloading The termination
on a loop may consist of any
combination of devices subjected
only to the requirement that the sum
of the REN does not exceed five
(5.0)
Notice :
The Industry Canada label identifies
certified equipment. This certification
means that the equipment meets
certain telecommunications network
protective, operational and safety
requirements. The Department does
not guarantee the equipment will
operate to the user's satisfaction.
Before installing this equipment,
users should ensure that it is
permissible to be connected to the
facilities of the local
telecommunications company. The
equipment must also be installed
using an acceptable method of
connection. The customer should
be aware that compliance with the
above conditions may not prevent
degradation of services in some
situations.
Repairs to certified equipment should
be made by an authorized Canadian
maintenance facility designated by
the supplier. Any repairs or
alterations made by the user to this
equipment, or equipment
malfunctions, may give the
telecommunications company cause
to request the user to disconnect the
equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe system, if present, are
connected together. This precaution
may be particularly important in rural
areas.
Caution :
Users should not attempt to make
such connections themselves, but
should contact the appropriate
electrical inspection authority, or
electrician, as appropriate.
Your VT9113 is designed to operate
at the maximum power allowed by
the FCC and IC. This means your
Handset and Base Unit can
communicate only over a certain
distance - which will depend on the
location of the Base Unit and
Handset, weather, and the
construction and layout of your
home or office.
REPLACEMENT BATTERY ORDER FORM
For VT 9113 Cordless Telephone
Name: Adress: 1
City:
State: Zip: 1
Daytime Phone Number: (
) - 1
ORDER INFORMATION
For Model VT 9113
(QTY.) Batteries @$19.95 each
...............................
$ 1
Shipping/Handling @$ 4.95 per battery
.................................
$ 1
METHOD OF PAYMENT: DO NOT SEND CASH
CHECK/M.O. VISA MASTERCARD DISCOVER
AMERICAN EXPRESS
Credit Card#
EXP. DATE
CARD HOLDER’S SIGNATURE
PLACE ORDER FORM AND PAYMENT IN ENVELOPE AND SEND TO:
VTECH ADVANCED AMERICAN TELEPHONES
P.O. BOX 167
HAZELWOOD, MO 63042
YOU MAY ALSO ORDER BY PHONE. CALL 1-800-595-9511
FCC, ACTA and IC REGULATIONS
FCC, ACTA and IC REGULATIONS
18 19
To Next Page
Loading...
Need help?
General
