6 Maintenance BS 30
18 Operator's manual
6 Maintenance
6.1 Periodic Maintenance Schedule
6.2 Long-Term Storage
1. Drain the fuel from the tank.
2. Start the engine and run it until remaining fuel is used.
3. Remove the spark plug. Pour approximately 30 ml (1 oz.) of clean SAE
10W30 engine oil into the cylinder through the spark plug opening.
4. Pull the starter rope slowly to distribute oil in the engine.
5. Re-install the spark plug.
Daily
before
starting
After
first
5
hours
Every
week
or 25
hours
Every
month
or 100
hours
Every
3
months
or 300
hours
Every
Year
Check fuel level.
Check air filter indicator.
Replace as needed.
Check fuel line and fittings for
cracks or leaks. Replace as
needed.
Tighten ramming shoe
hardware.
Check engine cylinder screws
Check external hardware
Clean engine cooling fins
Clean and check spark plug
gap
Replace spark plug.
Clean recoil starter.
Clean engine muffler and
exhaust port.
Inspect fuel filter.
To Next Page
Loading...
Need help?
General
