Wacker Neuson DV60 User Manual

5-26 BA D24 en/us* 1.0 * D24_1_0_510.fm
5 Operation
5.12 Emergency lowering
DANGER
Crushing hazard when lowering the skip!
Causes serious crushing or injury resulting in death.
► Do not allow anyone to stay in the danger zone.
► Stop all work movements immediately if someone enters the danger
zone.
Information
Lower the skip immediately after stopping the engine.
Lower the skip in case of an engine or hydraulic system malfunction.
1. Switch on the ignition
2. Enable work mode
3. Pull control lever A backward.
5.13 Options
Immobilizer (option)
A = starting key (blue)
For starting the vehicle. Scope of delivery includes 2 keys.
B = master key (red)
Information
Store the master key in a safe place. It can only be used for coding new
starting keys.
A new immobilizer must be installed if the master key is lost.
The machine can be started without performing any further settings.
Coding new starting keys
1. Insert master key B in the starter and turn it to position 1 for a
maximum five seconds.
2. Remove master key B.
3. Keep master key B at least 50 cm (19.68 in) away from the starter.
4. Within 15 seconds, turn starting key requiring coding to position 1 for at
least one second.
5. Repeat step 4 if more starting keys require coding.
➥ The keys are coded now.
Coding can be performed for a maximum of 10 starting keys.
Fig. 139
Fig. 139
A
Fig. 140
B
A
Fig. 141
0
1
2

Wacker Neuson DV60 Specifications

General

Brand	Wacker Neuson
Model	DV60
Category	Trucks
Language	English