Wacker Neuson WM 650 User Manual

Maintenance WM 650 / WM 720
wc_tx000656gb.fm 27
5.6 Storage
If unit is to be stored for more than 30 days:
5.6.1 Drain fuel from tank. Start engine and run until remaining fuel is used.
5.6.2 Change engine oil.
5.6.3 Remove spark plugs and pour approximately 3 ml (1 ounce) of SAE
30W oil into each engine cylinder through spark plug opening.
5.6.4 Install spark plugs. Leave ignition wires disconnected to prevent
engine from starting. Crank engine for one or two seconds to distribute
oil inside engine cylinders. Connect ignition wires.
5.6.5 Cover engine and store in a clean, dry area.

Wacker Neuson WM 650 Specifications

General

Brand	Wacker Neuson
Model	WM 650
Category	Engine
Language	English