slots for air intake covered.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fullled.
Technical Data
Max. viscosity: 130 DIN-s
Power source: 230 V ~
Power consumption: 350 W
Atomizing output: 105 W
Double insulation:
Sound pressure level: 80 dB (A)
Oscillation level: < 2,5 m/s²
Air hose length: 1,8 m
Weight: approx. 2.8 kg
Description (Fig. 1)
1 Air cup 10 Carrying belt
2 Nozzle 11 Air lter
3 Union nut 12 Air screen
4 Gun body standard spray attachment 13 Mains lead
5 Trigger guard 14 Spray gun holder
6 Material volume regulation 15 Container
7 Handle 16 Ventilating hose
8 Combined ON/OFF and speed switch 17 Valve
9 Air hose 18 Stirring rod
Coating Materials Suitable for Use
Water- and solvent-based paints, nishes, primers, 2-component paints, clear nishes,
automotive nishes, staining sealers and wood sealer-preservatives.
Coating Materials Not Suitable for Use
Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances.
Coating materials with a ash point below 21 °C.
The following materials can only be processed with optional accessories:
Interior wall paint (dispersions and latex paint)
Preparation of the Coating Material
The enclosed spray attachment can be used to spray paints, varnishes and glazes that are
undiluted or slightly diluted. Detailed information is available in the technical data sheet
of the manufacturer ( Internet Download).
Stir the material up and put the required amount into the paint container.1.
To Next Page
Loading...
Need help?
General
