4. Unplug the drink mixer before cleaning the outside of
the unit.
5. Clean the outside of the unit by using a cloth moist-
ened with a mild soap and water solution. Rinse the
cloth and wipe the unit again. Prevent liquid from run-
ning into the housing by wringing all excess moisture
from the cloth before using it. Wipe the housing dry
after rinsing.
Do not immerse the unit in water or any other
liquid.
MAINTENANCE
MOTOR: The motor requires no greasing or oiling. Sealed-
in lubrication gives the unit lifetime-smooth operation.
HELPFUL HINTS
1. Always be sure the control switch is in the “OFF” (O)
position before plugging in the drink mixer and before
removing the mixing cup when mixing has been
completed.
2. For best mixing results, add wet recipe ingredients to
the mixing cup before dry recipe ingredients.
3. The mixing times of beverages containing ice cream-
type ingredients will vary according to the hardness of
the ingredients. Softer ingredients work better.
4. If your recipe calls for ice, use only crushed ice in the
drink mixer.
5. Do not mix hot ingredients with your drink mixer.
6. Only operate the drink mixer when the cup is attached.
7. In general, start mixing on low speed for about
3 seconds. Finish mixing on low speed if all your
ingredients are liquid, to avoid splashing. If your recipe
includes solid ingredients (ice cream, powdered milk,
etc.) or if you need to whip cream or aerate eggs,
switch to high speed after the first 3 seconds of mixing
5
To Next Page
Loading...
Need help?
General
