6
CLEANING AND MAINTENANCE
Before performing any cleaning and maintenance operations
please be sure that the toggle switch is in the Off position
and that the unit is unplugged.
1. NEVER IMMERSE UNIT IN WATER OR PLACE IT IN
DISHWASHER.
2. WARNING: BLADE IS SHARP. DO NOT come in contact
with the blade or attempt to reach inside the ice chute to
clean the blade.
3. To clean the blade shaving mechanism, pour warm water
down the ice chute to clear any ice or syrup residue that
may have become lodged inside while crushing ice.
4. Wash snow bin, plastic cones and ice scooper using a
non-abrasive cleanser and water or place on the top rack of
the dishwasher. Dry thoroughly.
5. Wipe main housing and ice press with a clean damp cloth.
Any other servicing should be completed by an authorized
service center.
RECIPES AND SUGGESTIONS
The Waring Pro
TM
Snow Cone Maker is essential for everyday and
special occasion entertaining, effortlessly shaving ice at the ip of
a switch. Making 4-5 snow cones in less than a minute, the Snow
Cone Maker will be a hit at any party.
You can purchase store-made snow cone flavors or try
creating your own with the below recipes and simple
suggestions:
SIMPLE SUGGESTIONS
Drizzle any of the following over freshly shaved snow...and enjoy!
• Flavoreddrinkmixes
• Chocolatesyrup
• Pre-madejuicesmoothies
• Orangejuice
• Grapejuice
To Next Page
Loading...
Need help?
General
