Help Desk: 888-484-3776
support.weathermatic.com
AD232_revE
Use PGM to select
program A, B, C, or D.
Use NEXT and BACK buttons
to select options and scroll
between zones.
SmartLine® Basic Programming
(See reverse side of card for Smart
Programming Instructions).
1
Set time of day (AM/PM) and
month/day/year.
2
Set daily start times (AM/PM)
for Programs (A, B, C, D) in use.
Normally, one start time is sucient.
The start time is for the Program and
not each zone. The Program will run
all zones in consecutive order for each
start.
3
Set zone run times (1 min to 9
hours 55 minutes) for Programs
(A, B, C, D) in use.
4
Set watering days by selecting
days of week or interval (1 to
30 days) or odd or even days for
Programs (A, B, C, D) in use.
5
Set omit times, days, and dates
to accommodate watering
blackout periods (optional).
6
Set seasonal % by month for
Programs A, B, C, D (optional).
7
Return dial to RUN.
The Smart Irrigation Controller
PGM
PROGRAM
NEXT
BACK
UP
PRESS TO START
MANUAL PROGRAM
DOWN
CURRENT TIME / DATE
Manual Zone
Turn dial to MANUAL
ZONE. Use NEXT
button to select zone
to run. Use UP and
DOWN arrow keys to select
zone run time (1 min to 9 hours
55 minutes). Return dial to RUN
to start.
Manual Test
Turn dial to
MANUAL TEST.
Use UP and DOWN
arrows to enter run
time (10 seconds to 10 minutes)
for all zones with assigned run
time. Return dial to RUN to
start.
Refer to Owner’s Manual for
Advanced Menu dial position.
To Next Page
Need help?
General
