5
ENGLISH
Find a location to place the booster
inside the RV. A cabinet near a power
source would be best. Be sure it’s in
a location that the 9 meter outside
antenna coax cable can reach. Use 3M
Command™ Strips to secure mounting
bracket into place and mount booster by
sliding onto bracket.
Route the outside antenna cable into
the RV. We recommend routing the cable
through the slide out gasket or through
the back door of a toy hauler (flat entry
cable included).
IMPORTANT: Do not fully extend the
slide out until the cable is routed all the
way through.
STEP 3 Mount Booster and
Route Cable
cabinet
Bracket
Booster
To Next Page
Loading...
Need help?
General