10
ENGLISH
FIXING ANY RED LIGHT ISSUES
This involves Solid Red & Blinking Green/Red lights.
■ Verify outside and inside antenna face away from each other. Unplug and replug in
power supply.
■ Verify the inside antenna is at least 18 inches (45 centimeters) from the booster and
pointed away from the booster. Unplug and replug in power supply.
■ Tighten all cable connections (be sure to finger tighten only, do NOT use tools).
You may want to disconnect and reconnect the connection completely. Unplug and
replug in power supply.
■ Increase the distance (horizontally or vertically) between the outside and inside
antenna. Add included cable if needed. Unplug and replug in power supply.
FIXING ANY YELLOW LIGHT ISSUES
This involves Solid Yellow & Blinking Green/Yellow lights.
■ Outside antenna must be adjusted. Wait 10 seconds between adjustments for the
lights to reset. Rotate the outside antenna away from the strongest cellular signal in
small increments (1/4 turns) until the light turns green. Unplug and replug in
power supply.
Troubleshooting
To Next Page
Loading...
Need help?
General