9
Raising the Shell (continued)
I
II
III
IIII
3. Lift the Canopy Panel and use the Canopy Tool
to raise it to one of the four set position angles.
The tool ts into the triangular hole in the
top edge of the Canopy Panel.
There will be a slight “click” sound as the
Canopy Panel reaches each of the set
positions.
NOTE: One Canopy Tool is supplied with each
Legacy Classic Acoustical Shell set.
It may be stored on the frame of any shell.
4. Pull out and unfold the Crank Handle located
on the back side of the shell.
5. Turn the Crank Handle clockwise slowly to raise the panels.
The Crank will stop when the panels reach the shell’s
maximum height.
PULL
HANDLE
OUT AND
FOLD IN
FOR STORAGE
RAISE
LOWER
PULL
HANDLE
OUT AND
FOLD IN
FOR STORAGE
RAISE
LOWER
45°=38.5” (98 cm) Deep
60°=27” (69 cm) Deep
75°=14” (36 cm) Deep
90°=0” (0 cm) Deep
Do not force the crank handle
or the crank mechanism
could be damaged.
!
CAUTION
Crank
Handle
Canopy
Tool
Canopy
Panel
To Next Page
Loading...
Need help?
General
