Whynter ARC-14SH User Manual

14 | P a g e
WATER DRAINAGE
During the process of cooling, some water will be extracted from the air into the unit. Most of
this water is used to cool and exhausted to the outside. If the unit is operated in high humidity or
low temperature environment, water will collect in the reservoir inside the unit. If the reservoir is
full, the compressor will stop. To continue the cooling function, please drain the water.
1. Turn off the unit.
2. Position a flat container or dish under the drain plug.
3. Remove the drain plug and the condensed water will drain out automatically.
4. Once all the condensed water is drained, replace the drain plug into the drain firmly.

Whynter ARC-14SH Specifications

General

Type	portable
Operating Area Size	500 square feet
Cooling Settings	3
Seasonally Adjusted Cooling Capacity	8301.6 british thermal units
Heater	yes
Fan Speeds	3
Fan Airflow Rate	212 cubic feet per minute
Hose	dual
Remote Control	yes
Timer	yes
Sleeping Mode	no