10
Bottle Storage | Door Reversal
BOTTLE LOADING PLAN
- bottom of bottle
- top of bottle
32 bottles
32 bottles
32 bottles
16 bottles
12 bottles
REVERSING THE DOOR SWING
Tools needed: flathead screwdriver, Phillips screwdriver
CAUTION: Before you begin, unplug the wine cabinet refrigerator from power.
To remove the door:
1. Using a flathead screw driver carefully pry the top hinge
cover off.
2. Using a Phillips screwdriver, remove the screws and take
off top hinge. Keep the parts together and set them aside.
3. Lift the door off the bottom hinge and set the door aside.
4. Remove the bottom hinge by removing the screws with a
Phillips head screwdriver.
To install the door:
1. Using a flathead screwdriver, remove the plugs and cover
from the opposite cabinet top corner and from the door. Set
aside.
2. Install the bottom hinge at the opposite side corner and fas-
ten the screws.
3. Position the door on the bottom hinge.
4. Align the door on the bottom hinge and install the top hinge.
5. Push the plugs and covers into the corresponding holes.
To Next Page
Loading...
Need help?
General
