Electrical Connection
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have
it replaced by a qualified electrician or an authorized service center.
This Wine Cooler requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong.
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly
grounded. The cord should be secured behind the Wine Cooler and not left exposed or dangling to prevent
accidental injury.
The Wine Cooler should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rating label on the Wine Cooler. This provides the best performance and also prevent
overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the Wine Cooler
by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace
immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length or at either end. W hen moving the Wine Cooler, be careful not to
damage the power cord.
Extension Cord
Because of potential safety hazards, it is strongly recommended that you do not use an extension cord with this
Wine Cooler. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed,
3-wire grounding type Wine Cooler extension cord having a grounding type plug and outlet and that the
electrical rating of the cord be 115 volts and at least 10 amperes.
To Next Page
Loading...
Need help?
General
