EasyManuals Logo
Home>Windsor>Scrubber>CS26

Windsor CS26 Operating Instructions

Windsor CS26
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
Operations
Heavy scrub level cleaning
This mode is used for heavy level cleaning. In this mode the machine will propel at a
maximum of slow speed. The scrub deck will lower to a heavy down pressure. The water will
flow at a high rate. The vacuum will flow at a high rate.
Vacuum only mode
This mode is used for picking up solution only. The brushes and water will both be up and off.
In this mode the machine will propel at a maximum of slow speed. The squeegee will auto-
matically lower and the vacuum will flow at a high rate. The squeegee will raise in reverse.
The squeegee and vacuum will remain down and on in neutral propel.
Double Scrub cleaning
This mode is used for putting down solution and scrubbing without picking it back up. In this
mode the machine will propel at a maximum speed of slow. The scrub deck will automatically
lower to a heavy scrub level. The solution will flow at a high rate. The brushes and water will
shut off and raise when the machine is in neutral. They will resume when propelling is
resumed.
2. Solution Button and Indicator
The button enables and disables solution flow. When the green indicator is illuminated, solution flow is
enabled.
86395370 Operator Manual - Chariot 3 iScrub 26

Other manuals for Windsor CS26

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Windsor CS26 and is the answer not in the manual?

Windsor CS26 Specifications

General IconGeneral
BrandWindsor
ModelCS26
CategoryScrubber
LanguageEnglish

Related product manuals