EasyManuals Logo
Home>Windsor>Scrubber>CS26

Windsor CS26 Operating Instructions

Windsor CS26
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32
Maintenance
Changing Batteries
Stop the machine in a clean area next to the charger.
Turn off machine.
FOR SAFETY: Before leaving or servicing the
machine; stop on level surface, turn off machine
and remove key.
1. Remove the rear cover.
2. Disconnect battery pack from machine.
3. Unlatch battery tray from machine and pull out to
expose batteries.
4. Use the proper size open end wrench to discon-
nect main ground wire first and secure cable
terminal away from batteries.
5. Disconnect main positive lead and secure cable
terminals away from batteries.
6. Loosen both terminals on each jumper cable and
remove one at a time.
7. Prepare a suitable site to place the batteries.
Attach suitable battery lifting device and lift
batteries from the machine. Batteries are a
potential environmental hazard. Consult your
battery supplier for safe disposal methods.
Fixez le dispositif de levage de batterie approprié et
levez les batteries de la machine. Les batteries
constituent un danger potentiel pour l'environne-
ment. Consultez le fournisseur de votre batterie
pour connaître les méthodes d'élimination sûres.
86395370 Operator Manual - Chariot 3 iScrub 26
REAR OF MACHINE
+
--
++
-
RED
BLK
RED
BLK
RED
BLK

Other manuals for Windsor CS26

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Windsor CS26 and is the answer not in the manual?

Windsor CS26 Specifications

General IconGeneral
BrandWindsor
ModelCS26
CategoryScrubber
LanguageEnglish

Related product manuals