21
Operations
Optional Chemical Metering System
1. Fill chemical container and place into console
recess. Attach lid.
2. Open rear cover and turn chemical selection knob
to chemical manufacturers recommended dilution.
3. Press and hold prime button for 30 seconds or until
chemical has filled line to scrub deck.
Normal Scrubbing
Plan the scrubbing pattern in advance. The longest
track is around the perimeter of the area to be cleaned.
For efficient operation, the runs should be the longest
possible without turning, stopping, or raising or
lowering scrub deck/squeegee.
In order to achieve the best possible results, the area
which is to be cleaned should be swept before scrub-
bing. Large debris, strings and wire must be removed
to prevent being caught in brushes or squeegee.
If the machine is allowed to stand in neutral with the
scrub deck down, the solutions flow stops and brush
motors stop. If either forward or reverse travel is
selected, the solution flow will continue in the same
setting and the scrub brush motors will continue in their
same setting once movement of machine begins.
Overlap the brush path and avoid transporting over
previously cleaned areas.
86367610 Chariot CS26
To Next Page
Loading...
Need help?
General