2
Upright Vacuum
Call: 1-800-USA-CLEAN (800-872-2532) Click: www.usaclean.com Fax: 1-888-USA-CLEAN (888-872-2532)
Windsor Sensor
Poor or No Pickup
These are general maintenance guidelines.
Please consult your owner’s manual prior to performing any repairs or maintenance on this machine.
Difculty Tools Req. Check vacuum bag and lters
Low No - if bag is full or damaged, replace the bag.
Parts: Bag
Low Yes - if lters are clogged/dirty/damaged, replace the lters.
Parts: Filter
Note: See Replacing the Bag and Microlter on page 3.
See Replacing the Exhaust Filter on page 4.
Check hose for clog/damage
Low Yes - remove clog with a wire coat hanger or at tip screwdriver. If hose is damaged, replace the hose.
Parts: Hose
Note: See Removing a Clog on page 5.
Check brush roller
Low Yes - if brush roller is damaged, replace the brush roller.
Parts: Hose
Note: See Replacing the Brush Roller on page 6.
Check the belt
Low Yes - if belt is damaged, replace the belt
Parts: Belt
Note: See Replacing the Belt on page 6.
Windsor Sensor
No Power
Vacuum
Difculty Tools Req. Check the outlet
Low Yes - Try another outlet, if outlet is okay, change the cord and/or switch
Parts: Cord
Switch
Note: See Replacing the Power Cord and Switch on page 8.
To Next Page
Need help?
General
