1211
Water supply
valve handle
OPERATION METHOD
❶
After installing your product in the right
space, connect tube from Water Supply
to Water Supply inlet on your product.
❷
If you are installing an extra faucet,
connect the sink tube to the sink
faucet water outlet hole.
❸
Make sure Hot Switch is Off.
❺
Make sure Water is being dispensed
when pushing Hot Safety Switch.
❻
Turn Hot Switch On.
❹
Plug product in.
❼
Wait for about 15 minutes for hot water
and about 30 minutes for cold water.
PRODUCT SET UP
●
Connection of tube | Connect supplying tube to supply hole.
Water
supply
cap
Water
supply
cap
Hole Processing`:`7Ø Hole Processing`:`8Ø
Models W-3C, W-3D Models W-3TC, W-3TD
Models W-3C, W-3D
TUBING
CONNECTION
To Next Page
Loading...
