Lawn Mowing Robot EN
11
3.3 How Big Of An Area Can My
Landroid
®
M Mow?
Your Landroid
®
M is capable of mowing areas of up to around
10000sq.ft, although this depends on various factors, such as:
• Species of grass in your lawn and its growth rate
• Sharpness of the Cutting Blades (14)
• Humidity
• Surrounding temperature
• Amount of obstacles in your Lawn
If the surrounding temperature is very hot where you live then
your Landroid
®
M may charge at a slightly slower rate. The
Landroid
®
M uses less energy in open areas that have fewer
obstacles, such as flower beds, fountains, walkways, etc…
You can find the default work time of Landroid
®
M for different
lawn size in programming guide.
Mowing times are different for every lawn depending on the
factors mentioned previously. Gradually adjust the time you allow
your Landroid
®
M to mow each day until you find the most suitable
setting.
You can also program Landroid
®
M working time to suit your
schedule – refer to Programming Guide.
3.4 How Efficiently Will My
Landroid
®
M Mow The Grass?
The Landroid
®
M’s cutting height can be adjusted between
1.6 in.- 4.0 in.. Before starting your Landroid
®
M for the first
time, you should cut the grass to the height not more than
5 inches.
The blade disc can be assembled in two ways as per the grass
height.
The blade disc is assembled, as illustrated in Fig. F1, in the factory
and the cutting height can be adjusted from 2.4in. to 4.0in.. (See Fig.
F1). When turning over the Blade disc assembly (See Fig. F2), the
cutting height can be adjusted from 1.6 in. to 3.1in. with the blades
on the bottom side of the blade disc.
Before starting your Landroid
®
M for the first time, you should cut the
grass manually to the height not more than 5 inches. Then make sure
you open the Control Panel Cover (7) and set the cutting height to its
maximum cutting height of 4 inches (See Fig. G1, G2).
Your Landroid
®
M will cut its best in dry weather. It does not like
wet grass, which can build up on the Blade Disc (13) and within the
motor, and can also cause loose traction and slippage while working.
Your Landroid
®
M is afraid of lightning storms. In case of a lightning
storm, protect the Landroid
®
M by unplugging the Charging Base
(4), disconnecting the Boundary Wire (21), and making sure the
Landroid
®
M is not allowed to charge.
Your Landroid
®
M loves mowing grass and requires the Cutting Blades
(14) to be kept in good condition to cut at its best. The Landroid
®
M
can do most things by itself, but will need your help sometimes to
prevent damage to itself.
• Never let the Landroid
®
M travel over gravel.
• Remove or prevent access to obstacles that the Landroid
®
M
could accidentally climb on and damage its Blade Disc.
• Remove all debris and foreign objects from your lawn.
G2
G1
F1
F2
To Next Page
Loading...
Need help?
General
