11
Cordless Lawn Mower EN
VIBRATION INFORMATION
Typical weighted vibration
a
h
=xx m/s
2
uncertainty K=1.5m/s²
WARNING: The vibration emission value during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also
take account of all parts of the operating cycle such as the times when the tool is switched off and when
it is running idle but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORY
WG779E WG779E.1 WG779E.2 WG779E.9
Grass collection bag 1 1 1 1
Cable clip 2 2 2 2
Roller for stripe / / 1 /
Battery pack (WA3572) 2 / / /
Battery pack (WA3553) / 2 / /
Battery pack (WA3551) / / 2 /
Charger (WA3869) 1 / 1 /
Charger (WA3876) / 1 / /
We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel can assist you and offer advice.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
