3-speed Workshop Blower EN
7
i) Never operate the
machine with defective
guards or shields, or
without safety devices.
j) Keep the power source
clean of debris and other
accumulations to prevent
damage to the power
source or possible fire.
k) Do not transport this
machine while the power
source is running.
l) Always disconnect the
machine from the power
supply (e.g. remove the
battery pack from the
machine)
- whenever you leave the
machine,
- before clearing blockages
or unclogging chute,
- before checking, cleaning
or working on the
machine.
m) Avoid using the machine
in bad weather conditions
especially when there is a
risk of lightning.
4)Maintenance and
storage
a) keep all nuts, bolts and
screws tight to be sure
the appliance is in safe
working condition.
b) Replace worn or damaged
parts.
c) Use only genuine
replacement parts and
accessories.
d) Store the machine in a dry
place out of the reach of
children.
e) When the machine is
stopped for servicing,
inspection, or storage, or
to change an accessory,
shut off the power source,
disconnect the machine
from the supply and make
sure that all moving parts
are come to a complete
stop. Allow the machine
to cool before making any
inspections, adjustments,
etc. Maintain the machine
with care and keep it
clean.
f) Store the machine in a dry
place out of the reach of
children.
g) Always allow the machine
to cool before storing.
h) Never attempt to override
the interlocked feature of
the guard.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle,
open or shred cells or
To Next Page
Loading...
Need help?
General
