EasyManuals Logo
Home>Xantech>Keypad>D5KP

Xantech D5KP User Manual

Xantech D5KP
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
- 18 -
USER PARAMETERS
BASS
The “bass” control allows the sound to be adjusted on the lower frequency range. Using the volume
bar as an indicator, the central position shows the default position. Moving the indicator to the left side
lowers the bass, reducing the volume of the low frequency sound. Moving the indicator to the right
side increases the bass, increasing the volume of the low frequency sound.
The settings for this control can be adjusted from -5, -4, -3, -2, -1, 0 (default), +1, +2, +3, +4, +5.
TREBLE
The “treble” control allows the sound to be adjusted on the higher frequency range. Using the volume
bar as an indicator, the central position shows the default position. Moving the indicator to the left side
lowers the treble, reducing the volume of the high frequency sound. Moving the indicator to the right
side increases the treble, increasing the volume of the high frequency sound.
The settings for this control can be adjusted from -5, -4, -3, -2, -1, 0 (default), +1, +2, +3, +4, +5.
BALANCE
The “balance” control allows the sound to be adjusted from the right or left channel. Using the volume
bar as an indicator, the central position shows the default position where both left and right channel
audio can be played. Moving the indicator to the left side shifts the audio to the left channel only.
Moving the indicator to the right side shifts the audio to the right channel only.
The settings for this control can be adjusted from -5, -4, -3, -2, -1, 0 (default), +1, +2, +3, +4, +5.
DRC
The "DRC" control stands for ‘dynamic range compression’. This mode sets limiter thresholds at
different volumes allowing a nighttime listening mode that provides a reduction in the dynamic range
regardless of the volume level.
The settings for this control can be adjusted from ON to OFF only.
LOUDNESS
The "loudness" control is intended to make audio sound more natural when played at lower volume.
The control alters the frequency response curve to correspond to the natural characteristics off the
ear.
The settings for this control can be adjusted from ON to OFF only.

Other manuals for Xantech D5KP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xantech D5KP and is the answer not in the manual?

Xantech D5KP Specifications

General IconGeneral
BrandXantech
ModelD5KP
CategoryKeypad
LanguageEnglish