PostScript
This Xerox 4127/4110 supports PS3 commands that enable the features listed in the
following table.
Feature Description
Media Size This command specifies the size of media on which to
print the job.
Media Direction This command specifies the edge of the input medium
that will enter the printing engine or imager first and
across which data will be imaged. Values reflect
positions relative to a canonical page in portrait
orientation (width smaller than height):
Media Source This command specifies the tray to supply the job’s
media.
Media Source from
Bypass tray
This command indicates whether the input medium is to
be fed from bypass tray.
Media Color Use this command to indicate the color of the media
used to print a job.
Media Weight
Media weight. Unit: (g/㎡) gram per square-meter
Media Class Paper class (ex. normal, thick, recycled)
Media Type Media types are used to distinguish the type of media a
job requires.
Media Selection Specify if you apply the strict setpagedevice rule to
media selection.
Resolution This command sets the resolution value.
Duplex
Delivers two-sided output. Landscape documents read
like a calendar, and Portrait documents read like a book.
Tumble
Deliver two-sided output. (Use combine with Duplex)
Landscape documents read like a book and Portrait
documents read like a calendar.
Image Enhancement
Specify whether you apply edge-smoothing to output
after rendering
Toner Save
Use this command to control toner consumption when
printing.
Halftone Screen
Selection
This command specifies the screen type.
Output Location Indicates the output bin where the print job is sent.
Copies The number of copies to produce, either of each page
individually or of the document as a whole, depending
on the value of the Collate parameter.
Collation A flag specifying how the output is to be organized when
multiple copies are requested for a multiple-page
Page 2 Xerox 4127/4112 PDL Reference Guide
To Next Page
Loading...
Need help?
General
