Detailed Specifications Xerox Color
®
C60/C70
Customer Expectation and Installation Guide 10
Feeding Specifications
Automatic Document Feeder
Single Pass Duplex Automatic Document Feeder
250 sheets (Single-pass DADF)
up to 200 images per minute
5.5 x 8.5 in. to 11 x 17 in. / A5 to A3
16 lb. bond to 32 lb. bond / 50 gsm to 160 gsm
Tray 5: 250 sheets of 20lb/80gsm
Max: SRA3 SEF, 12x18” SEF
Min: 3.9x5.8”/100x148mm
Max: 13 x 19.2/330x488mm SEF
18 lb. bond to 80lb. cover / 64 to 216 gsm with additional 221-300gsm capability
Trays 1-2: 500 sheets each;
Tray 1: Min: A5 SEF, 8.5x5.5” SEF
Max: SRA3 SEF, 12x18” SEF
Trays 2: Min: A5 SEF, 8.5x5.5” SEF
Max: A3 SEF, 11x17 SEF
Tray 1: Min: 5.5x7.2”/140 x 182mm
Max: 13x18”/320 x 458mm
Trays 2: Min: 5.5 x 7.2”/140 x 182mm
Max: 11x17/297 x 432mm
18lb – 28lb
(64 – 105gsm)
Heavyweight 1:
28lb – 90lb index
(106– 176gsm)
Coated 1:
106-150gsm
Heavyweight 2:
65lb cover – 80lb cover
Coated 2:
(151-220gsm)
(177 – 220gsm)
Heavyweight 3:
(221 –256gsm)
*When feeding HW2,HW3,and/or coated stock it is highly recommended to feed from tray 5 (Bypass) or trays 6/7 (OHCF)
due to degraded feeding performance of these papers through trays 1-2.
Trays 3&4 (Total 2,010 sheets)
(Available with all configurations)
Tray 3: 870 sheets
Tray 4: 1140 sheets
Tray 3/4: B5 LEF or 7.25”x10.5”LEF
A4 LEF,8.5” x 11” LEF
Same as tray 1&2
18 lb. bond to 80 lb. cover uncoated/ (64to 256 gsm) / Coated (106-220gsm)
*When feeding HW2,HW3,and/or coated stock it is highly recommended to feed from tray 5 (Bypass) or trays 6/7 (OHCF)
due to degraded feeding performance of these papers through trays 3-4.
OHCF Trays 6&7(Total 4,000 sheets)
(Available with all configurations)
1 Tray OHCF: 7.2 x 10 in. / 182 x 250 mm (B5) to 13 x19.2 in. / 330 x 488 mm (SRA3);
2 Tray OHCF:4 x 6 in. /102 x 152 mm to 13 x 19.2 in. / 330 x 488 mm (SRA3)
• One or two tray module: 2,000 sheets / 4,000 sheets
• Small Media support included with 2 Tray OHCF(Must use small media guide when width is less than 182mm)
To Next Page
Need help?
General
