Xerox DOCUMATE 262 User Manual

DocuMate 262 Scanner User’s Guide 79
Scanning
2. Click the Properties button.
Your scanner has a built-in power saving feature that is set to
power down after 15 minutes of idle time. You can change the
time before the scanner powers down, from 1 minute to a
maximum of 10 hours.
3. Click the arrows for the Lamp timeout setting and choose a
time setting.
To turn the lamp on and off manually without turning off power
to the scanner, click the Lamp On or Lamp Off buttons.
To return the scanner to its factory settings, click Reset Device.
4. Click OK to save the changes and close the dialog box.

Xerox DOCUMATE 262 Specifications

General

Brand	Xerox
Model	DOCUMATE 262
Category	Scanner
Language	English