Xerox DocuMate 3920
User’s Guide
117
Replacing the ADF Pad Assembly
The ADF pad may wear out and is designed to be a user-replaceable part. Problems with documents
feeding into the ADF is an indication that the pad is wearing out. You should first clean the ADF
following the instructions in the previous section Cleaning the Automatic Document Feeder on
page 114.
You can order replacement ADF pad assemblies from the Parts & Accessories page for your scanner at
www.xeroxscanners.com. Please refer to the section Xerox DocuMate 3920 Parts List on page 124 for
ordering information.
To replace the ADF Pad assembly:
Discard the parts as you remove them from the scanner, the parts cannot be reused and are a choking
hazard.
1. Open the ADF cover. The pad assembly is located inside the ADF.
ADF Pad
Tension Spring
Traction Pad
Pad Housing
ADF Pad Parts List
ADF Pad Module
and Traction Pad
To Next Page
Loading...
Need help?
General