Operating the Xerox Production Media Cart (Nuvera)
Xerox Nuvera, iGen Production System Production Media Cart 17
Production Media Cart User Guide
Transferring the Stack to the CP Bourg BSFEx Air Table
This procedure assumes pick up from the XPS low position.
1. Position the Cart in front of the CP Bourg BSFEx Air Table.
2. Lower the Cart by pressing the lower part of the elevation button (approximate height 210
mm (8.25 in.).
3. Move the Cart forward until the front of the horizontal post mates with the red docking
station at the base of the Air Table.
4. Lock the casters.
To Next Page
Loading...
Need help?
General
