2.7 <
System setup>
Using toner save mode
Toner save mode allows the printer to use less toner on each page.
Activating this mode extends the life of your toner cartridge and reduces
your cost per page beyond what one would experience in the normal
mode, but it reduces print quality. This setting is not available with the
1200 dpi setting.
There are two ways to enable this mode:
From the control panel
To change the toner save mode from the control panel, follow these
steps:
1 Press Menu until System Setup appears on the bottom line of the
display and press OK.
2 Press OK when Toner Save appears.
3 Press the Scroll buttons to display On on the bottom line and press
OK.
Selecting Off means that the toner save mode is deactivated.
4 Press Stop to return to Standby mode.
From the software application
You can set toner save mode from the printer properties window on your
printer driver. See the Software Section.
To Next Page
Loading...
Need help?
General