Xerox Phaser 3428 User Manual

10.2 < Installing accessories>
Setting the memory in the PostScript printer
properties (Phaser 3428/DN only)
After installing the memory DIMM, you need to select it in the printer
properties of the PostScript printer driver so that you can use it.
1 Make sure that the PostScript printer driver is installed in your
computer. To installing the PostScript printer driver, you need to
select Custom and put a check mark on the PostScript printer
driver. See the Software Section.
2 Click the Windows Start menu.
3 For Windows 95/98/Me/NT4.0/2000, select Settings and then
Printers.
For Windows XP/2003, select Printers and Faxes.
4 Select the Xerox Phaser 3428 PS printer.
5 Click the right mouse button on the printer icon and select
Properties.
6 For Windows 95/98/Me, select Device Option tab.
For Windows NT4.0/2000/XP/2003, select Device Settings tab.
7 Select the amount of memory you installed from Printer Memory in
the Installable Option section.
For Windows 98, select Installable Option → VMOption →
change setting for:NMOption → change memory.
8 Click OK.

Xerox Phaser 3428 Specifications

General

Brand	Xerox
Model	Phaser 3428
Category	Printer
Language	English