Xerox Phaser 6120 Voluntary Product Accessibility Template

(e) When products provide auditory
output, the audio signal shall be
provided at a standard signal level
through an industry standard
connector that will allow for private
listening. The product must provide
the ability to interrupt, pause, and
restart the audio at anytime.
Not applicable There is no auditory output.
(f) When products deliver voice
output in a public area, incremental
volume control shall be provided with
output amplification up to a level of at
least 65 dB. Where the ambient
noise level of the environment is
above 45 dB, a volume gain of at
least 20 dB above the ambient level
shall be user selectable. A function
shall be provided to automatically
reset the volume to the default level
after every use.
Not applicable There is no voice output.
(g) Color coding shall not be used as
the only means of conveying
information, indicating an action,
prompting a response, or
distinguishing a visual element.
Supports Color coding and additional means of unique identification
(e.g., text and symbols) are used.
(h) When a product permits a user to
adjust color and contrast settings, a
range of color selections capable of
producing a variety of contrast levels
shall be provided.
Not applicable There are no color contrast settings.
(i) Products shall be designed to
avoid causing the screen to flicker
with a frequency greater than 2 Hz
and lower than 55 Hz.
Supports The flash rate of any flashing/blinking elements does not fall
between 2 Hz and 55 Hz.
(j) (1) Products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following: The
position of any operable control shall
be determined with respect to a
vertical plane, which is 48 inches in
length, centered on the operable
control, and at the maximum
protrusion of the product within the
48 inch length on products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls.
Not applicable The Phaser™ 6120 is a portable device and can be placed
on a table of any height.
www.xerox.com/Section508
Page 6 of 9
Last Revision: 10/25/2005

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm