EasyManuals Logo
Home>Xerox>Printer>Phaser 6120

Xerox Phaser 6120 Replacement Manual

Xerox Phaser 6120
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Replacing Consumables
77
When replacing a toner cartridge, refer to the following table. For optimum
print quality and performance, use only approved Xerox toner cartridges for
your specific printer type, as listed in the table below. If you open the top
cover, you can find your printer type and the toner cartridge part numbers on
the consumables reorder label inside your printer.
Keep toner cartridges:
In their packaging until you’re ready to install them.
In a cool, dry location away from sunlight (due to heat).
The maximum storage temperature is 35° C (95° F) and the maximum
storage humidity is 85% (noncondensing). If the toner cartridge is moved
from a cold place to a warm, humid place, condensation may occur,
degrading print quality. Allow the toner to adapt to the environment for
about one hour before use.
Level during handling and storage.
Toner Cartridge Type Toner
Cartridge
Part Number
Standard-Capacity Toner Cartridge - Yellow (Y) 113R00690
Standard-Capacity Toner Cartridge - Magenta (M) 113R00691
Standard-Capacity Toner Cartridge - Cyan (C) 113R00689
High-Capacity Toner Cartridge - Black (K) 113R00692
High-Capacity Toner Cartridge - Yellow (Y) 113R00694
High-Capacity Toner Cartridge - Magenta (M) 113R00695
High-Capacity Toner Cartridge - Cyan (C) 113R00693

Other manuals for Xerox Phaser 6120

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 6120 and is the answer not in the manual?

Xerox Phaser 6120 Specifications

General IconGeneral
ColorYes
Print technologyLaser
Time to first page (black, normal)13 s
Time to first page (color, normal)22 s
Print speed (black, normal quality, A4/US Letter)20 ppm
Print speed (color, normal quality, A4/US Letter)5 ppm
Internal memory128 MB
Processor model300 MHz, 32 bit RISC
Maximum print size210 x 297 mm
Maximum ISO A-series paper sizeA4
I/O portsUSB
Power requirements200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking featuresEthernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)10 - 85 %
Total input capacity200 sheets
Maximum input capacity500 sheets
Printer fontsPostScript
Maximum duty cycle35000 pages per month
Number of PostScript fonts139
Power consumption (printing)380 W
Storage temperature (T-T)-20 - 40 °C
Operating temperature (T-T)10 - 32 °C
Operating relative humidity (H-H)10 - 80 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)442 x 395 x 341 mm

Related product manuals