Xerox Phaser 6180MFP Features Setup Guide

Phaser® 6180MFP Multifunction Printer
EN - 1
Overview
Overview
The Features Setup Guide walks you through the steps necessary to
install and enable features on your Phaser 6180MFP Multifunction
Printer.
Use the Phaser 6180MFP Installation Guide to connect the printer to
your computer.
You can connect to your printer over an Ethernet (Network) or USB
connection. Scanner features vary according to your connection method.
Note: If you need help deciding whether to connect over Ethernet or
USB (or both), see Frequently Asked Questions on page 15.
This guide will help you to:
Install the Drivers and Utilities:
■ Windows 2000 or later
■ Macintosh 10.2 and higher
Enable Scan to Email, Scan to PC, and Scan to FTP Features:
■ Setting up a shared folder
■ Setting up an address for the scanner
■ Setting up SMTP server information
■ Setting up scanning to an FTP server
Enable Fax Features:
■ Entering fax number and country code
■ Creating individual fax addresses
■ Creating and editing a fax group
For detailed user information for this printer, go to www.xerox.com/
office/6180MFPsupport.

Xerox Phaser 6180MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Duplex Printing	Manual
Scan Type	Flatbed, ADF
Fax Capability	Yes
Fax Transmission Speed	33.6 Kbps
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	500 sheets
Max Paper Size	8.5 x 14 in
Connectivity	USB 2.0, Ethernet
Scan Resolution	1200 x 1200 dpi
Supported Paper Sizes	Letter, Legal, Executive, A4, A5, B5
Operating System Compatibility	Windows, Mac OS, Linux
Maximum Print Resolution	600 x 600 dpi