Phaser® 6250 Color Laser Printer
Copyright © 2003 Xerox Corporation. All Rights Reserved.
3-39
Novell NetWare
This topic includes:
■ "Configuration Software for NetWare Networks" on page 3-39
■ "Quick Setup" on page 3-39
■ "Advanced Setup" on page 3-39
■ "NetWare 4.x, NetWare 5.x, and NetWare 6.x Print Server Setup" on page 3-40
■ "Novell NetWare Troubleshooting" on page 3-40
Configuration Software for NetWare Networks
CentreWare DP configures the printer and the network when using NetWare 4.x and 5.x.
CentreWare DP is a Novell Directory Service (NDS)/Bindery tool used only for Novell
Distributed/Enterprise Print Services (NDPS).
Quick Setup
1. Print the “Configuration Page” and keep it for reference. For information about printing a
“Configuration Page”, go to Reference/Features/Front Panel on the User Documentation
CD-ROM.
2. View the “Configuration Page”, then verify the following:
■ Novell enable is On
■ Frame Type is correctly set.
3. Install CentreWare DP on a Windows-based workstation.
4. Run the CentreWare DP application, then click Setup Wizard on the Printer menu.
5. Select NDS Install, then follow the Setup Wizard steps.
6. Install printer drivers from the Printer Installer and Utilities CD-ROM.
7. Send a print job to the printer.
8. Verify the print-quality of the document. If print-quality problems exist, or if your
document did not print, go to Reference/Troubleshooting on the User Documentation CD-
ROM for more information.
Advanced Setup
The Advanced Setup option of CentreWare DP is a tool that allows you to control how your
devices are configured in your Novell NetWare network environment. This tool is necessary
for connecting your device to more than one file server or queue. For a connection to a single
device and queue, use Setup Wizard.
To Next Page
Need help?
General