Xerox PHASER 6250 Cartridge Remanufacturing Instructions

UNINET IMAGING INC. • XEROX
®
PHASER 6250 CARTRIDGE REMANUFACTURING INSTRUCTIONS
XEROX
®
PHASER 6250 TONER CARTRIDGE
REMOVING THE GEARLESS END CAP
1. Remove the gearless end cap (shown) to access the toner fill
cap. Using a small flathead screwdriver, carefully push out one
side of the end cap (shown) to unlock it from the first set of tabs.
2. Rotate the cartridge and disengage the third tab (shown) in
the same manner.
3. Disengage the fourth tab as shown.
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
www.uninetimaging.com/technical.asp
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • techsupport2@uninetimaging.com

Xerox PHASER 6250 Specifications

General

Brand	Xerox
Model	PHASER 6250
Category	Printer
Language	English