UNINET IMAGING INC. • XEROX
®
PHASER 6250 CARTRIDGE REMANUFACTURING INSTRUCTIONS
4. Carefully slide out the gearless end cap.
NOTE: Note the original positioning (shown) for reassembly.
REMOVING THE TONER FILL PLUG
5. Carefully insert a small flathead screwdriver between the base
of the toner fill plug and its housing as shown.
6. Carefully lift the toner fill plug out as shown. Be careful not to
damage the plastic housing.
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
www.uninetimaging.com/technical.asp
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • techsupport2@uninetimaging.com
To Next Page
Loading...
Need help?
General