Maintenance
Phaser 6500 Color Laser Printer
User Guide
118
When moving the printer:
• Always use two people to lift and move the printer.
• When lifting the printer, grasp the areas as shown in the illustration.
• Do not tilt the printer more than 10 degrees to the front or back, or left or right. Tilting the printer
more than 10 degrees can cause toner spillage.
After moving the printer:
1. Reinstall any parts you removed. If you removed the 250-sheet feeder, put the printer back on top
of it.
2. Reconnect the printer to the cables and power cord.
3. Plug in and turn on the printer.
4. Adjust the color registration before using the printer. For details, see Color Registration on
page 136.
CAUTION: Failure to repackage the printer properly can result in damage to the
printer not covered by the Warranty, Service Agreement, or Total Satisfaction
Guarantee.
Note: Configured with
the optional duplex unit
and 250-sheet feeder,
the printer weighs 24.2
Kg (53.24 lb.). Do not
move them together.
Move the Tray 2
assembly and the printer
separately.
To Next Page
Loading...
Need help?
General