Xerox Phaser 6500 User Manual

Troubleshooting
Phaser 6500 Color Laser Printer
User Guide
134
7. Remove the imaging unit:
a. Turn the four peach-colored twist-locks to the left to unlock the imaging unit.
b. Grasp the imaging unit by its peach-colored pull tabs on the top edge and then pull the unit
forward and up out of the printer.
c. Place the imaging unit on a flat surface and cover it with a sheet of paper to minimize its
exposure to light.
8. Using a clean, dry, lint-free cloth or swab, clean all debris from the laser lens.
9. Check for and remove any debris around the imaging unit gears located on the left side of the unit.
CAUTION: Do not drop or shake the imaging unit after removal because toner can
spill from it.
CAUTION: Do not expose the imaging unit to any light source for more than five
minutes. Prolonged exposure to light can damage the unit. Cover the imaging unit
while it is exposed. Do not touch the shiny blue transfer belt unit. For details, see
Internal Components on page 19.
p6500-025
90º
p6500-026
p6500-042

Xerox Phaser 6500 Specifications

General

Brand	Xerox
Model	Phaser 6500
Category	Printer
Language	English