EasyManuals Logo
Home>Xerox>Printer>VersaLink B600

Xerox VersaLink B600 Reference Guide

Xerox VersaLink B600
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Safety
8 Xerox
®
VersaLink
®
B600/B610 Printer Safety, Regulatory, Recycling, and Disposal
Reference Guide
Power Cord
Use the power cord supplied with your printer.
Plug the power cord directly into a properly grounded electrical outlet. Ensure that each end of the
cord is connected securely. If you do not know if an outlet is grounded, ask an electrician to check
the outlet.
WARNING: To avoid risk of fire or electrical shock, do not use extension cords, power strips, or
power plugs for more than 90 days. When a permanent outlet receptacle cannot be installed,
use only one factory-assembled extension cord of the appropriate gauge for each printer or
multifunction printer. Always adhere to national and local building, fire, and electrical codes
regarding length of cord, conductor size, grounding, and protection.
Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have a
ground connection terminal.
Verify that the printer is plugged into an outlet that is providing the correct voltage and power.
Review the electrical specification of the printer with an electrician if necessary.
Do not place the printer in an area where people can step on the power cord.
Do not place objects on the power cord.
Do not plug or unplug the power cord while the power switch is in the On position.
If the power cord becomes frayed or worn, replace it.
To avoid electrical shock and damage to the cord, grasp the plug when unplugging the power cord.
The power cord is attached to the printer as a plug-in device on the back of the printer. If it is necessary
to disconnect all electrical power from the printer, disconnect the power cord from the electrical outlet.
Emergency Turn Off
If any of the following conditions occur, power off the printer immediately and disconnect the power
cord from the electrical outlet. Contact an authorized Xerox service representative to correct the problem
if:
The equipment emits unusual odors or makes unusual noises.
The power cable is damaged or frayed.
A wall panel circuit breaker, fuse, or other safety device has been tripped.
Liquid is spilled into the printer.
The printer is exposed to water.
Any part of the printer is damaged.

Other manuals for Xerox VersaLink B600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox VersaLink B600 and is the answer not in the manual?

Xerox VersaLink B600 Specifications

General IconGeneral
Package weight28000 g
Country of originVietnam
Maximum resolution1200 x 1200 DPI
Optional connectivityWireless LAN
Storage temperature (T-T)-20 - 40 °C
Operating temperature (T-T)10 - 32 °C
Sustainability certificatesENERGY STAR
Operating relative humidity (H-H)10 - 85 %
Printing colorsBlack
Maximum duty cycle250000 pages per month
Recommended duty cycle0 - 20000 pages per month
Number of print cartridges1
Page description languagesHP-GL, PCL 5e, PCL 6, PostScript 3, TIFF, XPS
USB portYes
Package depth634 mm
Package width580 mm
Package height607 mm
Print technologyLaser
Warm-up time (from sleep mode)35 s
Time to first page (black, normal)6.3 s
Print speed (black, normal quality, A4/US Letter)55 ppm
Duplex print speed (black, normal quality, A4/US Letter)49.3 ppm
Paper input typePaper tray
Total input capacity700 sheets
Total output capacity150 sheets
Custom media width76.2 - 190 mm
Custom media length216 - 356 mm
Duplex media weight60 - 176 g/m²
Paper tray media typesBond paper, Card stock, Envelopes, Labels, Letterhead, Plain paper, Recycled paper
Paper tray media weight60 - 220 g/m²
Maximum ISO A-series paper sizeA4
Wi-Fi-
Cabling technology10/100/1000Base-T(X)
Security algorithms256-bit AES, FIPS 140-2, SNMPv3, SSL/TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Mobile printing technologiesApple AirPrint, Google Cloud Print, Mopria Print Service
Supported network protocols (IPv4)TCP/IP, HTTP/HTTPS, Internet Printing Protocol, LPR/LPD, Raw Socket Printing/Port 9100, IPv4/IPv6, WSD LDAP, FTP
Processor cores2
Processor familyARM Cortex
Sound power level (standby)27.1 dB
Sound pressure level (printing)56.8 dB
Current rating8 A
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.3 W
Power consumption (standby)72 W
Power consumption (printing)900 W
Control typeTouch
Product colorWhite
Market positioningBusiness
Mac operating systems supportedMac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra
Server operating systems supportedWindows 2000 Server, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012
Windows operating systems supportedWindows 10, Windows 7, Windows 8
Cables includedAC
Included cartridge capacity (black)1 pages
CompatibilityVersaLink B600/B610
Weight and Dimensions IconWeight and Dimensions
Depth465.5 mm
Width427.4 mm
Height443.4 mm

Related product manuals